Quality, professional 3D printing resins

DPM (Dipropylene Glycol Methyl Ether)

An ideal solvent cleaning material to remove uncured resin from your prints following printing, its significantly faster in its removal of uncured resin than IPA (which was the solvent traditionally used for this task).

DPM last approximately 3 to 5 times longer than IPA before needing replacement.

With its high flash point DPM is suited to safe use in a ultrasound bath (unlike IPA) and has significantly less smell than IPA.

We recommend using it at 30c in an ultrasound bath for best performance. After resin removal any residual DPM can be removed by a quick rinse in water which has a splash of washing up liquid.

IPA Flash point: 11.7c

DPM Flash point: 75.0c


Contact: admin@resinous3d.com